PE65 Multi-Axis Computer Controlled Profiler (Contour Cutter) |
|
|
A state of the art highly advanced 6 axis Profiler with completely independent front and rear axis. Featuring frames that move in and out to maintain wire tension and length. Machine can be used to produce completely different shapes between the front and rear of the item i.e. a square to a circle, cones, pyramids, skewed letters and artistic shapes. Ideal for supplying the foundry industry for core production with draft angles. Multiple production of complex shapes using up to 28 (0.5mm) wires. Supplied complete with all graphical programming software, scanning software and scanner. Vertical and horizontal frames are provided. Software control of heat of the hot wires. Can be used in software lock mode as a conventional 2 axis profiler.
Mechanical specification
All movements are mounted on precision ground slides with positioning either by toothed belt or ball lead screw. Micro stepper cards are used to drive stepper motors geared down with zero back-lash gearboxes.
Overall size - 4M x 2.5M x 2M
Maximum Billet- 2.5M x 1.3M x 1.3M
Electrical Specification - Single phase 240 VAC 6KVA.
4M or longer versions are available. |
PE62 Computer Controlled Profiler (Contour Cutter) |
 |
|
A two axis version of the above machine for standard profiling work. Supplied complete with scanning software.
Overall size - 3.5M x 2.5M x 2M
Maximum Billet - 2.5M x 1.3M x 1.3M
Smaller and longer versions are available.
|
PE10 Slicer/Dicer |
 |
|
| This model auto slices and dices 2440 x 1220 x 650 mm blocks into sheets and cut pieces. Wires are set in 1mm pitch studding. Capable of heating up to 52 (0.5mm diameter) wires in the (X) axis and 28 in the (Y) axis. The slicing frame can be quickly and easily changed for optional frames to save setting time.
Mechanical specification
Overall size L=5000 W=1830 H=2340mm
Maximum Billet L=2500 W=1330 H=710mm
Horizontal movement controlled by DC motor with electronic variable speed control, moving on precision ground slides and positioned via toothed belt for smooth cutting. Vertical movement controlled by DC motor with electronic variable speed control , operating four lift chains. Positioning controlled by low maintenance 6 point Nylatron bearing running on steel guides.
Electrical Specification
Three phase input 415 AC 20 KVA Full electronic modular control of temperature and speed.
Alternative models are made to take the following block sizes.
PE102 - 2.5M x 1.3M x 1.3M
PE104 - 4.0M x 1.3M x 1.3M
|
PE20 Dicer |
 |
|
This machine is designed to cut small pieces of polystyrene and allow for ease of packing due to the small size.
This model dices up to maximum size of 1330 x 710 x 660 mm billets or pre-cut sheets. Wires set on a 1mm pitch studding. Capable heating up to 65 wires in the (X) direction and 28 in the (Y) direction
Mechanical Specification
Overall size L=2620 W=820 H=2340mm
Maximum Billet L=1330 W=710 H=660mm
Vertical movement controlled by DC motor with electronic variable speed control , operating four lift chains. Positioning controlled by low maintenance 6 point Nylatron bearing running on steel guides.
Electrical specification
Three phase input 415 VAC 12 KVA with full electronic modular control of temperature and speed.
Alternative models PE21 - To take a 1.33M x 1.33M x 0.66M
|
PE30 Chipper |
 |
|
| Machine to chop up scrap material and shape to produce curved chips , ideal for use in the packaging industry as loose infill.
Mechanical Specification
The machine comprises three frames set 90 degrees to each other with the lowest frame oscillating back and forth using a DC motor with variable speed control.
Overall size L=915 W =815 H=2745mm
Maximum Billet L=560 W=560 H=560mm
Electrical Specification - Single phase 415 VAC input 9KVA. Fully variable heat and shuttle control
|
PE41 - Semi Automatic Scooping Machine |
 |
|
| A multi-purpose machine, which with the aid of the optional attachments, scoops out square or circular holes, balls, eggs, cylindrical shapes, blind circular stepped holes. The machine can also be used for guillotining. All functions are controlled by foot pedal and micro-switch stops. Internal controls utilise a PLC.
Mechanical Specification
Overall size L=1220 W=710 H=1855mm
Maximum billet L=1220 W=710 H=500mm
Maximum height of billet is dependant on type of head fitted.
Vertical movement is controlled by ball lead screw, precision ground slides, driven by a variable speed DC motor and control..
Horizontal and vertical rotating heads have internal motors controlled by a DC speed control
Electrical Specification - Single phase input 240 VAC 3 KVA.
|
PE42 - Fully Automatic Scooping Machine
|
 |
 |
| Fully automatic version of the PE41 allowing for automatic scooping, guillotining, cylinder and ball production utilising a moving back board to index the material along. Controls are processed by a PC and operations are input via a screen and keyboard. All attachments are interchangeable with the PE41. |
